Guide to Choosing the Right Hydro Evacuation Nozzle
Hydro evacuation nozzles are available in several types to cater to different applications and project conditions. The right evacuation nozzle can be difficult to find. Therefore, before you embark on renting a hydro excavation nozzle, you should find out which nozzle suits your needs. Before choosing which hydro evacuation nozzle to rent, there are several things you need to consider. Conducting proper research is the first thing you should do before you embark on renting a hydro evacuation nozzle. When researching, you should focus on finding the best place for hydro evacuation nozzle rentals in your area and identifying your needs.
Finding a hydro evacuation nozzle that matches the capabilities of your pump is important. However, you need to understand how hydro evacuation nozzles are sized to do this. Nozzle size and pressure has a lot of influence on the flow rate of water. When the hydro evacuation nozzle is overloaded, the results can be disastrous. If you want to avoid overloading a hydro evacuation nozzle, check the manufacturer’s ratings of the pump and the flow rate chart. Secondly, when choosing a hydro evacuation nozzle, you should consider the project you are working on. For potholing applications, it is recommended that you use the rotating turbo nozzle. The rotating turbo nozzle has a high impact zero degrees stream that rotates at an optimized speed to form a corn-shaped pattern hence it is the best nozzle for potholing applications.
Static zero degrees nozzle is the best hydro evacuation nozzle for trenching applications. A static zero-degree nozzle cuts through dirt with less water. Static zer0-degree nozzle combines two or more static streams in a linear pattern to form a blade-like flow. Static zero degree nozzle has a linear flow path making it the most suitable nozzle for trenching applications. You should find a small-sized hydro evacuation nozzle if you are concerned with the safety of underground utilities. A small sized hydro evacuation nozzle has less flow hence cannot damage underground utilities. Also, when using underground evacuation nozzles in places with underground utilities, you should lower the flow pressure.
It is recommended you lower the pressure up to twenty-five hundred psi when using a rotating nozzle in places with underground utilities. Lowering the pressure to twenty-five hundred allows you to wash the underground utility and avoid damages the utilities. When choosing an underground evacuation nozzle, you should also consider the digging speed and the water consumed during the digging. You should choose a small-sized nozzle if you are far away from a water source or dumping site for the debris. Even though you will take time to dig the needed size choosing a small-sized nozzle will help you conserve water.